Aiuto stampante anycubic delta kossel

Tecnologia, meccanica, materiali, utilizzo.

Moderatore: kalytom

Avatar utente
tomas
Member
Member
Messaggi: 254
Iscritto il: giovedì 6 dicembre 2007, 22:16
Località: Imola
Contatta:

Re: Aiuto stampante anycubic delta kossel

Messaggioda tomas » mercoledì 22 marzo 2017, 22:05

Ciao Salvatore La stampante la ho comprata su
https://www.amazon.it
Si chiama anycubic delta e la mainboard che monta è una trigorilla.

Adesso dalla Cina mi dovrebbero aver spedito qualcosa, ma non ho capito se una mainboard o quell'altra schedina.
Forse se rispondono alle mail potrò essere più preciso su cosa arriverà....

Se hai bisogno di altre info chiedi pure...
Intanto di nuovo grazie per il tuo aiuto.
La meccanica non è la moglie del meccanico !!!!
http://www.querciatomas.altervista.org/

eBay

eBay annunci

da eBay » lunedì 24 aprile 2017, 4:30


Avatar utente
tomas
Member
Member
Messaggi: 254
Iscritto il: giovedì 6 dicembre 2007, 22:16
Località: Imola
Contatta:

Re: Aiuto stampante anycubic delta kossel

Messaggioda tomas » lunedì 17 aprile 2017, 16:26

Ciao a tutti dopo una lunga attesa mi è arrivata l'ennesima mainboard è per fortuna funzionante e con il firmware caricato.

Seguendo le istruzioni del manuale,usando il programma in dotazione pronterface, ho mandato l'estrusore tutto in alto sui finecorsa e poi piano piano a sfioro sul piatto interponendo un foglio di carta.

A questo punto il manuale dice che bisogna andare a cambiare un valore nel firmware , ma io il firmware no lo ho caricato e non so se è possibile prendere quello dentro la stampante (non so come si fa).

Spero che ci sia qualcuno che mi possa aiutare.

Almeno dopo 3mesi questa volta si è mossa....

Ci sono quasi.....

Pero ho bisogno di aiuto,non ho mai fatto cose del genere.....

Grazie a chi mi potrà aiutare.
La meccanica non è la moglie del meccanico !!!!
http://www.querciatomas.altervista.org/

salvatore993
Senior
Senior
Messaggi: 1519
Iscritto il: giovedì 23 novembre 2006, 8:04
Località: Napoli-Tenerife
Contatta:

Re: Aiuto stampante anycubic delta kossel

Messaggioda salvatore993 » martedì 18 aprile 2017, 6:58

che firmware è caricato nella scheda che ti hanno mandato? di solito il livellamento del piano, o valori relativi alla corsa si possono caricare anche dal programma per usarla.

Avatar utente
vdeste
Senior
Senior
Messaggi: 2609
Iscritto il: mercoledì 17 febbraio 2010, 14:41
Località: Torre del Greco NA

Re: Aiuto stampante anycubic delta kossel

Messaggioda vdeste » martedì 18 aprile 2017, 7:48

Il firmware è quasi sicuramente MARLIN. Il procedimento è semplice ma bisogna fare diversi passaggi quindi ti consiglio di cercare le istruzioni / tutoraial su Youtube e seguirle passo passo. Se non trovi quelle della tua stampante, cerca " geetech g2s delta rostock " è una delta con firmware marlin, e ci sono video tutorial passo passo.
Detesto quello che tu dici, ma difenderò fino alla morte il tuo diritto di dirlo.
Adoro discutere, odio litigare

Innaig
Member
Member
Messaggi: 251
Iscritto il: venerdì 26 settembre 2014, 14:49
Località: Forlì

Re: Aiuto stampante anycubic delta kossel

Messaggioda Innaig » martedì 18 aprile 2017, 10:53

Buongiorno,
procediamo con calma... Usi il firmware originale che è sulla sd? allora devi usare arduino IDE 1.6.8 (anche esso contenuto nella sd).
Usi Marlin rc8 oppure MK4DUO? allora ti serve Arduino Ide 1.8.1.
Ti servono inoltre i drive (anche essi sulla SD) ma...se la vecchia scheda ha "fumato"...probabilmente hai rotto anche la porta USB del pc.
Se vuoi iscriviti su FB a Anycubic Italia così avrai il supporto di tutti noi con la delta.

Saluti

Avatar utente
tomas
Member
Member
Messaggi: 254
Iscritto il: giovedì 6 dicembre 2007, 22:16
Località: Imola
Contatta:

Re: Aiuto stampante anycubic delta kossel

Messaggioda tomas » martedì 18 aprile 2017, 19:37

Allora,provo a rispondere a tutti.
Oggi l'assistenza mi ha mandato un link del firmware che a detta loro è stato caricato nella mainboard.
https://drive.google.com/open?id=0B8VIB ... m43aG1OQ0U

In precedenza ho avuto problemi a caricare il firmware perché la scheda non andava percui se esiste un modo alternativo per cambiare quei valori io lo preferisco,così non faccio dei casini....
Ho mosso la stampante con un software in dotazione che si chiama Pronterface però io non so con quello si fa e come si fa....
Poi c'è anche un software che si chiama cura.
Attendo vostri consigli.....
Per altre info sono a disposizione.
La meccanica non è la moglie del meccanico !!!!
http://www.querciatomas.altervista.org/

Avatar utente
tomas
Member
Member
Messaggi: 254
Iscritto il: giovedì 6 dicembre 2007, 22:16
Località: Imola
Contatta:

Re: Aiuto stampante anycubic delta kossel

Messaggioda tomas » giovedì 20 aprile 2017, 20:51

Ciao a tutti , ho provato seguendo le istruzioni a cambiare il valore in z.
praticamente nel firmware c'è 300 e io ho rilevato con il foglio di carta sotto l'ugello che ci vuole 333,7.
sono andato nel configuration h ,nella riga dove dice il manuale e ho cancellato 300 e inserito 333,7.
ho premuto carica e mi ha dato questo errore:



Arduino:1.6.8 (Windows 7), Scheda:"Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\arduino-builder -dump-prefs -logger=machine -hardware "C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware" -tools "C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\tools-builder" -tools "C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr" -built-in-libraries "C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries" -libraries "C:\Users\Michela\Documents\Arduino\libraries" -fqbn=arduino:avr:mega:cpu=atmega2560 -ide-version=10608 -build-path "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp" -warnings=none -prefs=build.warn_data_percentage=75 -verbose "C:\Users\Michela\Desktop\Anycubic kossel firmware\Anycubic_kossel\Anycubic_kossel\Anycubic_kossel\Anycubic_kossel.ino"
C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\arduino-builder -compile -logger=machine -hardware "C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware" -tools "C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\tools-builder" -tools "C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr" -built-in-libraries "C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries" -libraries "C:\Users\Michela\Documents\Arduino\libraries" -fqbn=arduino:avr:mega:cpu=atmega2560 -ide-version=10608 -build-path "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp" -warnings=none -prefs=build.warn_data_percentage=75 -verbose "C:\Users\Michela\Desktop\Anycubic kossel firmware\Anycubic_kossel\Anycubic_kossel\Anycubic_kossel\Anycubic_kossel.ino"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Anycubic_kossel.ino.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Anycubic_kossel.ino.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src\LiquidCrystal.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Anycubic_kossel.ino.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\M100_Free_Mem_Chk.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\MarlinSerial.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Marlin_main.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Sd2Card.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\SdBaseFile.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\SdFatUtil.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\SdFile.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\SdVolume.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\blinkm.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\cardreader.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\configuration_store.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\dac_mcp4728.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\digipot_mcp4451.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\endstops.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\mesh_bed_leveling.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\planner.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\planner_bezier.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\printcounter.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\qr_solve.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\servo.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\stepper.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\stepper_dac.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\stepper_indirection.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\stopwatch.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\temperature.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\twibus.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\ultralcd.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\utility.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\vector_3.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\watchdog.cpp" -o "nul"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Anycubic_kossel.ino.cpp" -o "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\preproc\ctags_target_for_gcc_minus_e.cpp"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\tools-builder\ctags\5.8-arduino10/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\preproc\ctags_target_for_gcc_minus_e.cpp"
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Anycubic_kossel.ino.cpp" -o "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Anycubic_kossel.ino.cpp.o"
Uso il file precedentemente compilato: C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\M100_Free_Mem_Chk.cpp.o
Uso il file precedentemente compilato: C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\MarlinSerial.cpp.o
"C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\cores\arduino" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\hardware\arduino\avr\variants\mega" "-IC:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal\src" "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Marlin_main.cpp" -o "C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Marlin_main.cpp.o"
Marlin_main.cpp:407: error: too many initializers for 'float [3]'

soft_endstop_max[XYZ] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };

^

In file included from C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\MarlinConfig.h:30:0,

from C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Marlin.h:36,

from C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Marlin_main.cpp:220:

Configuration.h:978: error: expected unqualified-id before numeric constant

#define MANUAL_Z_HOME_POS 333,7 // Distance between the nozzle to printbed after homing

^

C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Configuration.h:825:19: note: in expansion of macro 'MANUAL_Z_HOME_POS'

#define Z_MAX_POS MANUAL_Z_HOME_POS

^

C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Marlin_main.cpp:567:35: note: in expansion of macro 'Z_MAX_POS'

delta_clip_start_height = Z_MAX_POS;

^

Marlin_main.cpp:657: error: too many initializers for 'const float [3]'

{ X_##CONFIG, Y_##CONFIG, Z_##CONFIG }; \

^

C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Marlin_main.cpp:662:1: note: in expansion of macro 'XYZ_CONSTS_FROM_CONFIG'

XYZ_CONSTS_FROM_CONFIG(float, base_max_pos, MAX_POS)

^

Marlin_main.cpp:657: error: too many initializers for 'const float [3]'

{ X_##CONFIG, Y_##CONFIG, Z_##CONFIG }; \

^

C:\Users\Michela\AppData\Local\Temp\buildaa09b9ab8240e13950b0bddbd6c173bd.tmp\sketch\Marlin_main.cpp:663:1: note: in expansion of macro 'XYZ_CONSTS_FROM_CONFIG'

XYZ_CONSTS_FROM_CONFIG(float, base_home_pos, HOME_POS)

^

Uso la libreria LiquidCrystal alla versione 1.0.5 nella cartella: C:\Users\Michela\Desktop\arduino-1.6.8-windows\arduino-1.6.8\libraries\LiquidCrystal
exit status 1
too many initializers for 'float [3]'



AIUTOOOOOOOOO !!!!!!!!!!!!!!
LA TIRO GIU DALLA FINESTRA ORMAI !!!!!!
La meccanica non è la moglie del meccanico !!!!
http://www.querciatomas.altervista.org/

Innaig
Member
Member
Messaggi: 251
Iscritto il: venerdì 26 settembre 2014, 14:49
Località: Forlì

Re: Aiuto stampante anycubic delta kossel

Messaggioda Innaig » venerdì 21 aprile 2017, 12:17

Guarda che è colpa Tua, almeno il manuale dovresti leggerlo....

"(Given the height in the firmware is 300mm, now it should be changed into 300-1.2=298.8mm, then uploading the firmware again)"


333,7 errato.
333.7 giusto.

Saluti

Avatar utente
tomas
Member
Member
Messaggi: 254
Iscritto il: giovedì 6 dicembre 2007, 22:16
Località: Imola
Contatta:

Re: Aiuto stampante anycubic delta kossel

Messaggioda tomas » venerdì 21 aprile 2017, 19:29

Scusa intendi il punto o virgola?
La meccanica non è la moglie del meccanico !!!!
http://www.querciatomas.altervista.org/

salvatore993
Senior
Senior
Messaggi: 1519
Iscritto il: giovedì 23 novembre 2006, 8:04
Località: Napoli-Tenerife
Contatta:

Re: Aiuto stampante anycubic delta kossel

Messaggioda salvatore993 » sabato 22 aprile 2017, 7:11

anche, ma probabilmente hai messo anche il valore nel tab sbagliato.

Avatar utente
tomas
Member
Member
Messaggi: 254
Iscritto il: giovedì 6 dicembre 2007, 22:16
Località: Imola
Contatta:

Re: Aiuto stampante anycubic delta kossel

Messaggioda tomas » sabato 22 aprile 2017, 10:43

Il valore lo ho messo in configuration h nella riga dove dice il manuale.
Non andava li ?
La meccanica non è la moglie del meccanico !!!!
http://www.querciatomas.altervista.org/

salvatore993
Senior
Senior
Messaggi: 1519
Iscritto il: giovedì 23 novembre 2006, 8:04
Località: Napoli-Tenerife
Contatta:

Re: Aiuto stampante anycubic delta kossel

Messaggioda salvatore993 » domenica 23 aprile 2017, 8:26

in alcune versioni, esiste oltre al configuration.h un tab (può chiamarsi setting, o altro, dipende appunto dalla versione) che aggiorna da solo anche il configuration.h. poiché a volte alcuni valori sono da aggiornare in più file, e quindi una volti messi nel tab giusto li mette lui dove serve.


Torna a “Stampanti 3D”

Chi c’è in linea

Visitano il forum: Nessuno e 0 ospiti