leggendo il manuale , pare non sia un poblema di WVista ma di display. da come ho capito il proiettore deve lavorare su un secondo display
1. Software must be connected to cutting machine before using, otherwise it cannot be used normally.
2. The second screen display
Dual display screen mode: computer graphics card has more than two extension video output
capability. Ensure that in the main control window is displayed in the monitor display, the projection
window or the correction window displayed in the full projector screen. Single display screen mode: computer only has one way extension video output capability. The
monitor screen is displayed on the main control window at the same time as the projection window or the
correction window. If the software doesn’t connect to second extension screen, the machine offline, which
cannot be used normally
io ho collegato il proiettore in modo che i pc lo riconoscesse come secondo schermo TV(secondario al monitor PC), ho provato ogni combinazione ma il risultato è sempre lo stesso e cioè il proiettore non si attiva.
metto il link del manuale:
http://en.rd-acs.com/down.aspx?TypeId=5 ... 4:50062:14, scaricare RdProjector Software ManualV1.0.
spero possa servire.
grazie