probe_parport.so problema emc

Sezione dedicata a Linuxcnc
Rispondi
Avatar utente
takoda
Junior
Junior
Messaggi: 71
Iscritto il: mercoledì 18 aprile 2007, 18:53
Località: Prato (PO)

probe_parport.so problema emc

Messaggio da takoda » giovedì 15 marzo 2012, 13:18

Ho installato Emc2 2.4 su debian 6 se apro emc2 e selezino axismm parte axis e vedo l'interfaccia di emc ma se creo una configurazione con stepconf si chiude con questi errori:

Grazie!!


Print file information:
RUN_IN_PLACE=no
EMC2_DIR=
EMC2_BIN_DIR=/usr/bin
EMC2_TCL_DIR=/usr/share/emc/tcl
EMC2_SCRIPT_DIR=
EMC2_RTLIB_DIR=/usr/lib/emc2/modules
EMC2_CONFIG_DIR=
EMC2_LANG_DIR=/usr/share/emc/tcl/msgs
INIVAR=inivar
HALCMD=halcmd
EMC2_EMCSH=/usr/bin/wish8.5
EMC2 - 2.4.7-18-gd06e286
Machine configuration directory is '/home/takoda/emc2/configs/my-mill'
Machine configuration file is 'my-mill.ini'
INIFILE=/home/takoda/emc2/configs/my-mill/my-mill.ini
PARAMETER_FILE=emc.var
EMCMOT=motmod
EMCIO=io
TASK=milltask
HALUI=
DISPLAY=axis
NML_FILE=
Starting EMC2...
Starting EMC2 server program: emcsvr
Loading Real Time OS, RTAPI, and HAL_LIB modules
Starting EMC2 IO program: io
Shutting down and cleaning up EMC2...
Killing task emcsvr, PID=9987
Removing HAL_LIB, RTAPI, and Real Time OS modules
Removing NML shared memory segments
Cleanup done

Debug file information:
probe_parport: dlopen: /usr/lib/emc2/modules/probe_parport.so: cannot open shared object file: No such file or directory
my-mill.hal:6: /usr/bin/rtapi_app exited without becoming ready
my-mill.hal:6: insmod failed, returned -1
9987
PID TTY STAT TIME COMMAND
Stopping realtime threads
Unloading hal components

billielliot
Senior
Senior
Messaggi: 1747
Iscritto il: martedì 16 ottobre 2007, 23:23
Località: Trezzo sull'Adda

Re: probe_parport.so problema emc

Messaggio da billielliot » giovedì 15 marzo 2012, 13:30

Ciao takoda,

non sono un esperto ma sembrerebbe che la porta parallela non sia disponibile (forse e' gia' occupata dal sistema operativo o da qualche altro processo).

Se posso chiedere: perche' hai installato EMC2 su Debian e non hai piu' semplicemente scaricato l'immagine della distribuzioone completa che si appoggia a Ubuntu? (se non erro di derivazione Debian)

Ciao :-)

Mauro

P.S. sul tuo computer e' presente almeno una porta parallela?
Amat victoria curam

Avatar utente
takoda
Junior
Junior
Messaggi: 71
Iscritto il: mercoledì 18 aprile 2007, 18:53
Località: Prato (PO)

Re: probe_parport.so problema emc

Messaggio da takoda » giovedì 15 marzo 2012, 13:51

Perchè ubuntu sul mio pc fa i capicci e non si installa così ho instalato emc su debian http://buildbot.linuxcnc.org/ da quì!

billielliot
Senior
Senior
Messaggi: 1747
Iscritto il: martedì 16 ottobre 2007, 23:23
Località: Trezzo sull'Adda

Re: probe_parport.so problema emc

Messaggio da billielliot » giovedì 15 marzo 2012, 14:10

Ciao takoda,

qui ho trovato le seguenti informazioni. Magari ti sono d'aiuto per risolvere.

Ciao :-)

Mauro

6.2 probe_parport

In modern PCs, the parallel port may require plug and play (PNP) configuration before it can be used. The probe_parport module performs configuration of any PNP ports present, and should be loaded before hal_parport. On machines without PNP ports, it cannot be loaded.

6.2.1 Installing

Codice: Seleziona tutto

loadrt probe_parport
loadrt hal_parport ...
If the Linux kernel prints a message similar to

Codice: Seleziona tutto

parport: PnPBIOS parport detected. 
when the parport_pc module is loaded (sudo modprobe -a parport_pc) then use of this module is probably required
Amat victoria curam

Rispondi

Torna a “Linuxcnc”