Problema aiuto

[buonocoredavide79]

Buongiorno

Allego il post processor che ho in uso (software artcam)vorrei poter utilizzarlo con featurecam ma purtroppo non è compatibile qualcuno può aiutarmi? il mio pantografo ha un controllo syntec

grazie mille

[buonocoredavide79]

; non facendomi inviare il file vi alllego la forma scritta

;
DESCRIPTION = "MTL - Multi Tool (*.cnc)"
;
FILE_EXTENSION = "cnc"
;
UNITS = mm
;
; Cariage return - line feed at end of each line
;
END_OF_LINE = "[13][10]"
;
; Block numbering
;
LINE_NUM_START = 1
LINE_NUM_INCREMENT = 1
LINE_NUM_MAXIMUM = 9999999
;
; Set up default formating for variables
;
; Line numbering
FORMAT = [N|@|N|1.0]
; Spindle Speed
FORMAT = [S|@|S|1.0]
; Feed Rate
FORMAT = [F|#|F|1.1]
; Tool moves in x,y and z
FORMAT = [X|#|X|1.4]
FORMAT = [Y|#|Y|1.4]
FORMAT = [Z|#|Z|1.4]
;
; Arc Center
FORMAT = [R|@|R|1.4]
;
; Home tool positions
FORMAT = [XH|@|X|1.4]
FORMAT = [YH|@|Y|1.4]
FORMAT = [ZH|@|Z|1.4]
;
; Set up program header
;
START ="%"
;START ="O1234([FILENAME])"
;START = " "
;START ="(MATERIAL:)"
;START = "( X MIN:[XMIN] Y MIN:[YMIN] Z MIN:[ZMIN])"
;START = "( X MAX:[XMAX] Y MAX:[YMAX] Z MAX:[ZMAX])"
;START = "( X SIZE:[XSIZE] Y SIZE:[YSIZE] Z SIZE:[ZSIZE])"
;START = "( THICKNESS:[ZMATERIAL])"
;START = " "
;START = "(FIRST TOOL INFORMATION)"
;START = "( TOOL NUMBER:[T])"
;START = "( DESCRIPTION:[TOOLDESC])"
;START = " "
;START = "(FEED RATES IN INCHES PER MINUTE) "
;START = "( CUTTING FEED RATE:[FC])"
;START = "( PLUNGE FEED RATE :[FP])"
;START = "( RAPID FEED RATE :[FR])"
;START = "( SPINDLE SPEED :[S] r.p.m)"
START = " "
START = "[N] G90 G49 "
START = "[N] G40 G80"
START = "[N] G54"
START = "[N] G53 Z0"
START = "[N] G0 [XH] [YH]"
START = "[N] M05"
START = "[N] M6T[T]"
START = "[N] M3 [S]"
START = "[N] G43 H[T]"
;
; Program moves
;
RAPID_RATE_MOVE = "[N] G0 [X] [Y] [Z]"
FIRST_FEED_RATE_MOVE = "[N] G1 [X] [Y] [Z] [F]"
FEED_RATE_MOVE = "[N] [X] [Y] [Z]"
TOOLCHANGE = "[N] M5"
;
;
;
;
;
; Toolchange Sections
;
;TOOLCHANGE = " "
;TOOLCHANGE = "(######## ToolChange ########)"
;TOOLCHANGE = " "
;TOOLCHANGE = "(FIRST TOOL INFORMATION)"
;TOOLCHANGE = "( TOOL NUMBER:[T])"
;TOOLCHANGE = "( DESCRIPTION:[TOOLDESC])"
;TOOLCHANGE = " "
;TOOLCHANGE = "(FEED RATES IN MMS PER MINUTE) "
;TOOLCHANGE = "( CUTTING FEED RATE:[FC])"
;TOOLCHANGE = "( PLUNGE FEED RATE :[FP])"
;TOOLCHANGE = "( RAPID FEED RATE :[FR])"
;TOOLCHANGE = "( SPINDLE SPEED :[S] r.p.m)"
TOOLCHANGE = "[N] M6T[T]"
TOOLCHANGE = "[N] M3 [S]"
TOOLCHANGE = "[N] G43 H[T]"
TOOLCHANGE = "[N] G0 G90 G54 [ZH]"
TOOLCHANGE = "[N] G0 G90 G54 [XH] [YH]"
;
; End of file
;
END = "[N] G80"
END = "[N] M5"
END = "[N] G53 Z0"
END = "[N] G53 X0 Y0"
END = "[N] M30"
END = "%"

[torn24]

Nel caso di postprocessor , non saprei aiutarti , ma mi domando che tipo di istruzioni ISO usa il tuo controllo , forse potresti usare un postprocessor per altri cnc , non hai l'elenco dei Gcode e il loro significato usati dal tuo controllo ??

esempio
G0 posizionamento rapido
G43 compensazione lunghezza utensile
ecc..