23 = size in inch
L = Laminated Stack Stepping Motor ( same for P and K )
M = 1.8 ( Y = 0.9, U = 3.75 and Q = 5 )
C = Phase Hybrid( Same as M,Q,K,H,Z )
3 = Motor Length = 49.5 mm
5 = ?
5 = ?
P1-P9 = Custom with pulley ( 01-99 = Custom , G1-G9 = Custom with gear )
V = With connector ( W = Without connector , None = Without connector )
DATI 23LM-C355-P6V:
Bipolar
Rated Current = 1.5 A/Wdg
Winding Resistance = 2.2 Ohm
Voltage = 2.3V
No of Leads = 6 wire
Holding Torque = 6.2 Kg-cm
Inductance = 5.5 mH
Rotor Interia = 0.110 Kg-cm2
Detent Torque = 550 g-cm
Weight = 450 gr
Qualcuno che magari li ha già provati potrebbe confermare che le caratteristiche sono le stesse di quelle riportarte sopra,
tranne che per il numero di passi (72)? La resistenza degli avvolgimenti è la stessa. Voglio provare ad utilizzarli per muovere la meccanica che ho finito, in abbinamento a viti M10 passo 1,5mm.